7.5.5
STUDIO SETUP -> OPTIONS/LEVELS/POWER-ON STATE
This tab sets various options for the speaker listening level:
Options
•
Auto-Dim on Talkback
– this option is identical to the one defined under
. It is repeated here
so that it can be saved and loaded by Presets.
Levels
These options affect how the speaker level (on the CONTROLLER page) is displayed, and the
Reference
and
DIM
functions, see
7.1.4: Adjusting the Listening Level (Speaker Volume)
•
Display unit
- defines how the speaker level is displayed:
o
Unreferenced
= the level value is unreferenced and expressed in dB, from -60 to +20 in 1 dB steps.
o
dB C
= the level value is relative to the current calibration level (displayed on-screen once you have calibrated the
speaker set). It is expressed in dB SPL, from 0 to +115 in 1 dB steps.
o
Cinema
= the level value is relative to the current calibration level and is expressed as a range, from 0 to 10 in 0.1
steps.
•
Reference Volume recall level
– defines the speaker reference level value (recalled by the
Ref
button on the CONTROLLER
page).
•
Maximum Volume level
– defines the maximum speaker level (available on the CONTROLLER page).
•
Dim offset level
– defines the amount of dim applied to the speaker level (when you press the
DIM
button or auto-dim on
talkback is active).
•
Maximum Headphone level
– defines the maximum headphone level (available on the CONTROLLER page).
Power-On State
This option is not related to a preset and saved globally.
•
Auto-mute on power-on
– automatically engage the mute at machine startup. The user will need to unmute explicitly to
send any signal to a speaker set.
•
Recall fixed level on power-on
– By default, at machine startup, the volume is set to the last level, at machine shutdown.
This option allows starting the machine with a default level, independently of the last volume set at the previous shutdown.
