Trinity TLS-0401, Owner'S Manual

Page: 3 / 12

ASSEMBLY INSTRUCTIONS
Be sure to assemble the SIDE HANDLES (C) on
both the TOP CHEST (A) and BOTTOM CHEST
(B) to make it easier to move your Tool Chest.
Position the SIDE HANDLE (C) over the pre-
installed nuts on the side of your Tool Chest.
Insert HANDLE BOLTS (D) through holes on
SIDE HANDLE (C). Use a 10mm wrench to
tighten HANDLE BOLTS (D) to your Tool Chest.
Repeat these instructions to install all the SIDE
HANDLES (C).
© 2016 TRINITY - 800.985.5506
2
STEP 1
STEP 2
A (1)
10mm
E (2) F (2) G (16)
B (1) C (4)
D (24)
Carefully lay BOTTOM CHEST (B) on its backside.
Position LOCKING CASTERS (E) on the side of the
BOTTOM CHEST (B) of your choice and align holes to pre-
installed nuts on the underside of BOTTOM CHEST (B).
Use a 14mm socket wrench to tighten CASTER BOLT (G)
to BOTTOM CHEST (B).
Repeat above instructions to install the NON-LOCKING
CASTERS (F).
Notes:
* Make sure to install both of the LOCKING CASTERS (E)
on the same side.
** For ease of use, place LOCKING CASTERS (E) on the
side you will regularly push or pull.
*** If you plan to push the Tool Chest against a wall,
place LOCKING CASTERS (E) on the front long side for
ease of access.
14mm