TMCM-1160 CANopen® Firmware Manual • Firmware Version V3.20 | Document Revision V2.10 • 2019-JAN-04
62 / 110
Value Definition
Value
Mode
0
Encoder used
-1
No encoder
Table 175: Value Description (606A
h
)
Object Description
Index
Name
Object Type
Data Type
606A
h
Sensor selection code
Variable
SIGNED16
Table 176: Object Description (606A
h
)
Entry Description
Sub-index
Access
PDO Mapping
Value Range
Default Value
0
rw
no
0/-1
-1
Table 177: Entry Description (606A
h
)
5.1.9
Object 60FD
h
: Digital Inputs
This object contains the states of the digital inputs of the module. Starting from bit 0, every bit reflects the
state of one digital input. The number of valid bits depends on the number of digital inputs on the module
used.
Object Description
Index
Name
Object Type
Data Type
60FD
h
Digital inputs
Variable
UNSIGNED32
Table 178: Object Description (60FD
h
)
Entry Description
Sub-index
Access
PDO Mapping
Value Range
Default Value
0
rw
mappable
UNSIGNED32
0
Table 179: Entry Description (60FD
h
)
5.1.10
Object 6502
h
: Supported Drive Modes
This object provides information on the supported drive modes. A bit that is set means that the mode is
supported, a bit that is not set means that the mode is not supported by the drive.
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at