•
This product uses a lithium-ion battery. Excessive impact or bending may damage the battery, causing fire.
Mounting
Mounting the mount
1.
Prepare the mount and rubber bands.
2. Select an appropriate size rubber band and place it
on the handle.
3.
After fitting the mount to the groove of the rubber band, use a 2.5mm screw and a hexagon wrench to tighten the mount
.
4. Check if the mount is properly tightened.
5. After inserting the device into the mount horizontally, turn it 90 degrees to affix it.
페이지
| 4
Summary of Contents for trimmOne
Page 1: ...User Manual...
Page 48: ...purchased 47...
