24 IN GRAZING DOE
ITEM NUMBER:
M16(24)-70L
A. A pair of ears
Qty
：
1pc
B. Head/neck
Qty
：
1pc
C. Body
Qty
：
1pc
D. Ground stake
Qty
：
4pcs
ASSEMBLY INSTRUCTIONS
(1) Take out all the parts of the product and place them on a flat surface; If there are any
plastic covers to protect the end of metal rod tips, remove the covers before assembly;
(2) Unfold the hind legs; Insert a hook inside the rear body into the corresponding hole at the
edge of hind leg; (See diagram 1,2).
(3) Unfold the front legs. Slide the front legs sideways to the end along the horizontal rod. Insert
the metal hook on one front leg into the tube on the other front leg to secure them in position.
(See diagram 2)
(4)There is a pair of long hooks on the two sides of the body, insert them into the corresponding
hole in the two front legs to secure them in position.(see diagram 2)
(5) There is a pair of hooks on the rear neck, secure the rear neck hooks onto the front body.
(see diagram 2)
(6) Insert the two metal rods at the bottom of the ears into the holes on top of the head.(see
diagram 2)
(7) Take the item outside. Secure the figure into the ground with the ground stakes
provided.(see diagram 2
）
(8)Plug in.
diagram 1
diagram 2
