Trilux LiveLink LightGrid, Instruction Manual

Page: 46 / 51

46
4 APPENDIX
4.1 SETTING OPTIONS
4.1.1 230V PUSH-BUTTON INPUT
230V push-button input
do not use no function
Pulse: MANUAL <-> OFF Switch manual mode on and off by push-button pulse
Pulse: AUTO <-> OFF Switch automatic mode on and off by push-button pulse
Pulse: -> OFF BWM (motion sensor) ready Switch off lighting and activate motion sensor by push-button pulse
Pulse: -> OFF Switch off lighting by push-button pulse
Pulse: -> Scene 1 Call up scene 1 by push-button pulse
Pulse: -> Scene 2 Call up scene 2 by push-button pulse
Pulse: -> Scene 3 Call up scene 3 by push-button pulse
Pulse: -> Scene 4 Call up scene 4 by push-button pulse
Pulse: Scene 1 <-> OFF Call up scene 1 or switch off lighting by push-button pulse
Pulse: Scene 2 <-> OFF Call up scene 2 or switch off lighting by push-button pulse
Pulse: Scene 3 <-> OFF Call up scene 3 or switch off lighting by push-button pulse
Pulse: Scene 4 <-> OFF Call up scene 4 or switch off lighting by push-button pulse
Short: AUTO <-> OFF / long: bright <-> dark Short button press: switch automatic mode on or off
Long button press: Touchdimm
Short: AUTO <-> OFF / long: warm <-> cool Short button press: switch automatic mode on or off
Long button press: Colour Touchdimm
Short: MANUAL <-> OFF / long: bright <->
dark
Short button press: switch manual mode on or off
Long button press: Touchdimm
Short: MANUAL <-> OFF / long: warm <->
cool
Short button press: switch manual mode on or off
Long button press: Colour Touchdimm
Long: bright <-> dark Long button press: Touchdimm: luminaire is dimmed down
Long: warm <-> cool Long button press: Colour Touchdimm: Press and hold the push-button and the luminaire
dims to the cool white light range. Another long press dims the luminaire to the warm white
light range.
external BWM (motion sensor) Direct Signal input is via a motion sensor that enables the direct component of the lighting
external BWM (motion sensor) Indirect Signal input is via a motion sensor that enables the indirect component of the lighting
external BWM (motion sensor) Dir+Indir Signal input is via a motion sensor that enables the direct and indirect component of the
lighting
Pulse: OFF group Push-button pulse switches off the assigned group of the controller
Pulse: OFF group BWM (motion sensor) ready Push-button pulse switches off the assigned group of the controller and the motion sensor is
activated
Pulse: OFF group room Push-button pulse switches off the assigned group and room of the controller
Pulse: OFF group room BWM (motion sensor)
ready
Push-button pulse switches off the assigned group and room of the controller and the motion
sensor is activated
Pulse: ON AUTO group Push-button pulse switches on the assigned group of the controller and enables its automatic
mode
Pulse: ON AUTO room Push-button pulse switches on the assigned room of the controller and enables its automatic
mode
Pulse: Scene 1 group Push-button pulse enables scene 1 of the group
Pulse: Scene 2 group Push-button pulse enables scene 2 of the group
Pulse: Scene 3 group Push-button pulse enables scene 3 of the group
Pulse: Scene 4 group Push-button pulse enables scene 4 of the group
Pulse: Scene 1 room Push-button pulse enables scene 1 of the room
Pulse: Scene 2 room Push-button pulse enables scene 2 of the room
Pulse: Scene 3 room Push-button pulse enables scene 3 of the room
Pulse: Scene 4 room Push-button pulse enables scene 4 of the room
APPENDIX