Trilux LiveLink LightGrid, Instruction Manual

Page: 17 / 51

17
3 COMMISSIONING
3.1 APP USE
3.1.1 OVERVIEW
The LiveLink LightGrid app is used to configure luminaire groups, sen-
sor functions, general lighting and push-buttons. The respective set-
tings can be individually adjusted in the app. Note:
Before opening the LiveLink LightGrid app, make sure the Bluetooth
function is activated on the smartphone.
Motion sensor
Representation of the sensitivity
of the motion sensor in percent.
Colour temperature control
Setting of the colour tempera-
ture value in the range of 2700K
- 6500K.
Automatic mode
Switch automatic mode on/off.
Scenes
Call up four pre-configured or
individual scenes. Press and
hold to save scenes.
Settings
Configuration options for fur-
ther lighting/luminaire settings
Display options
Display or hide the set values
for constant light control and
the motion sensor.
On/off switch
Switch the selected lighting on
or off.
3.1.2 QR CODES
The LiveLink LightGrid app is used to configure luminaire groups, sen-
sor functions, the swarm function and push-buttons. The respective
settings can be individually adjusted in the app.
Note:
Before opening the LiveLink LightGrid app, make sure the Bluetooth
function is activated on the smartphone or tablet.
COMMISSIONING
© trilux.com | 211215 | 10259365 25 | 28
LIVELINK SWARMSENS
~ 2,5
max. 5
+ 45
°
max
. 4
+ 4
5°
ma
x. 4
LiveLink
SwarmSens
LiveLink
SwarmSens
i
i
m
© trilux.com | 211215 | 10259365 25 | 28
LIVELINK SWARMSENS
~ 2,5
max. 5
+ 45
°
max
. 4
+ 4
5°
ma
x. 4
LiveLink
SwarmSens
LiveLink
SwarmSens
i
i
m
LiveLink
LightGrid
LiveLink
LightGrid