Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc., its susidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
16
Installation Guide for SecureMesh® CONN-2000 - PL-0689A
Chapter 3. Prepare for Installation
This chapter provides information on preparing the CONN-2000 for installation.
Tools
Before beginning the installation, gather the following tools:
l
10 mm nut driver or socket wrench
l
13 mm nut driver or socket wrench
l
An adjustable open-end wrench, like a Crescent wrench
l
#2 size Phillips screwdriver
l
#2 size flat screwdriver
l
RJ45 crimp tool HTS 2700 (or suitable)
l
For configuration: a computer or laptop with a terminal emulation program and
a network interface card
Location Requirements
The location must meet all of the following access guidelines.
l
Conforms to all local electrical codes and ordinances
l
Either owned by the utility, or where the utility has access rights
l
Provides adequate power
l
If needed, space to use a bucket truck
l
Allows access for normal maintenance
The location must meet all of the following radio guidelines:
l
High enough above ground level for line-of-sight access to the target device.
Summary of Contents for SecureMesh CONN-2000
Page 2: ......
Page 5: ...Index 52...
