Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings Inc., its subsidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
48
Installation Guide for SecureMesh WAN® Gateway 2 - PL-0073A
Steps
Use the following steps to access the CLI using WiFi.
Note:
These steps assume that you are connecting to a GATE-2000
configured with factory default WiFi settings.
1. From a client WiFi device, search for the SSID of the gateway, the factory
assigned MAC address. The password/Pre-Shared Key (PSK) is
Trilliantxxxxxx, where xxxxxx are the last 6 characters of the MAC address.
Example:
l
SSID: 000ADBDA0175
l
PSK: TrilliantDA0175
2. Wait for the WiFi connection to be established.
3. Use a telnet client, like PuTTY, to connect to the default IP address of
192.168.4.1.
4. When prompted, enter the CLI password. The default password is
public
.
Table 8:
show wifi
Command
Description
show wifi
Shows the current WiFi configuration and status information.
Configuration
Description
Interface
Indicates whether the WiFi interface is enabled or disabled.
SSID
Indicates the string of alphanumeric character that specifies.
PSK
Indicates the string of plain-English passphrase characters that specifies
the Pre-Shared Key which must be between 8 and 63 characters long.