Trilithic EASy-PLUS, Operation Manual

Page: 27 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
25
Modem Connection
1. Connect the computer and the EASyPLUS Modem to their respective telephone
lines.
2. Ensure no other programs on the computer are using the required PC COM port.
3. On the
Main tab, click the Disconnect button.
4. Click the
Select
button.
5. On the pop-up
Select Type of
Communications Port window, select
the radio button corresponding to
Serial/Modem then click the Accept
button.
6. In the pop-up Device Selection window, select the
desired modem from the pull-down list, then click the
OK
button.
If the desired port is not shown in the
Device Selection
pull-down list, Windows does not properly recognize the
device and a Windows driver may need to be installed.
7. Enter the telephone number for the desired system in the Telephone Number text
box, including any digits needed to access an outside line (1 for long distance; 9
for an outside line, etc.). A comma can be used to add a pause to the dialing, and
dashes or spaces can be added for enhanced readability (for example: 9, 1, 555-
456-7890).
8. Click the Connect button. After a short delay, the modem will
connect and the status message at the bottom-center of the window
will display the speed at which the modem connected.
9. When done configuring the modem connection for the EASyPLUS,
click the Disconnect button to open the telephone line.