Trilithic EASy-PLUS, Operation Manual

Page: 26 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
24
Serial Connection
1. Connect the 9-pin null modem serial cable (provided) between the desired
communications port on the computer, and COM-1 on the EASyPLUS.
2. Ensure no other programs on the computer are using the required PC COM port.
3. On the
Main tab, click the Disconnect button.
4. Click the Select button.
5. On the pop-up Select Type of
Communications Port
window, select
the radio button corresponding to
Serial/Modem then click the Accept
button.
6. In the pop-up Device Selection window, select the PC
COM Port from the pull-down list, then click the OK
button.
If the desired port is not shown in the Device Selection
pull-down list, Windows does not properly recognize the
device and a Windows driver may need to be installed.
7. Click the
Connect
button. The status message at the bottom-center
of the program window will display “…Connected at 38400 BAUD.”