Trilithic EASy-PLUS Operation Manual Download

Page: 11 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09

How this Manual is Organized

This installation manual addresses hardware installation concerns for the EASyPLUS Encoder/

Decoder.
This manual is divided into the following chapters:

• Chapter 1, “General Information,” provides Trilithic contact information and describes

how this installation manual is structured.

• Chapter 2, “Important Information,” provides key information about the EASyPLUS, how

to correctly set up each encoder/decoder, references to supplementary manuals, and

operational considerations.

• Chapter 3, “Software Installation,” details the procedure for installing the EASyPLUS

Configuration software, which will be used to configure and control the EASyPLUS.

• Chapter 4, “General Configuration Information,” provides information about interacting

with the EASyPLUS, connecting the EASyPLUS to the host computer, and establishing

communication between the EASyPLUS and the Configuration software.

• Chapter 5, “EASyPLUS Configuration,” details the procedure for using the EASyPLUS

Configuration software to set up the EASyPLUS Encoder/Decoder for operation in an

EAS environment.

• Chapter 6, “Understanding EASyPLUS Logs,” provides examples of various EAS logs

and a description of the information contained within the logs.

• Chapter 7, “Appendix,” includes the warranty statement.

Summary of Contents for EASy-PLUS



















































































































Search results

Summary of Contents for EASy-PLUS

Reviews:

Related manuals for EASy-PLUS

Brands by name

Popular brands

Trilithic EASy-PLUS, Operation Manual

Search results

Summary of Contents for EASy-PLUS

Reviews:

Related manuals for EASy-PLUS

Brands by name

Popular brands