manualshive.com logo in svg

Trilithic 720 DSP, Operation Manual

Share
Download
Trilithic 720 DSP Operation Manual Download Page 417

www.trilithic.com

Page V-5

720 DSP Operation Manual

Business Services Meter

www.trilithic.com

The 

Web Browser

 screen will be displayed 

as shown in the image to the right. This 

screen allows you to view web sites.
This screen displays the default home page 

of the 720 DSP and includes a list of six 

favorite web sites. The favorites can be set 

using the ViewPoint WFM Module software.
Use the softkeys at the bottom of the screen 

to perform the following actions:

•  Back

 – Select this softkey to back up 

to the previously displayed web site.

•  Menu

 – Select this softkey to display 

the menu pop-up menu to perform the 

following actions:

•  Zoom In

 – Select this option to 

zoom in.

•  Zoom Out

 – Select this option 

to zoom out.

•  Zoom 100%

 – Select this option to zoom the browser to 100%.

•  Forward

 – Select this option to go forward to a previously displayed web site.

•  Home

 – Select this softkey to return to the 720 DSP home page.

•  Refresh

 – Select this softkey to refresh the current web site.

Web Browser

Chapter 2 

Using 

the

 Web Browser

Select the 

Browser

 icon as shown in the 

image to the right to open the built-in web 

browser of the 720 DSP. Before using 

the web browser, be sure to connect to a 

network.

Summary of Contents for 720 DSP

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands