manualshive.com logo in svg

Trilithic 120 DSP, Operation Manuals

Share
Download
Trilithic 120 DSP Operation Manuals Download Page 37

www.trilithic.com

Page I-21

120 DSP Operation Manual

Basic Signal Level Meter

120

Charging Status

The Title Bar at the top of the 120 DSP screen displays the battery voltage and the 

following charging status icons:

Charging

 - This icon is displayed when the 120 DSP battery is charging. When 

charging, the battery voltage will be shown between 3 and 4 VDC (dependent on 

charging source).

100% Charge

 - This icon is displayed when the 120 DSP battery is charged from a 

minimum of 4.0 VDC or approximately 100% of battery capacity.

75% Charge

 - This icon is displayed when the 120 DSP battery is charged from a 

minimum of 3.75 VDC or approximately 75% of battery capacity.

50% Charge

 - This icon is displayed when the 120 DSP battery is charged from a 

minimum of 3.50 VDC or approximately 50% of battery capacity.

25% Charge

 - This icon is displayed when the 120 DSP battery is charged from a 

minimum of 3.40 VDC or approximately 25% of battery capacity. When the battery 

charge drops to this level, it is recommended that the battery is charged soon.

0% Charge

 - This icon is displayed when the 120 DSP battery is charged to less than 

3.40 VDC or approximately 0% of battery capacity. When the battery charge drops to 

this level, it is recommended that the battery is charged immediately.

If the 

 icon is displayed, the unit is in calibration mode. 

See Section II: Setup, Chapter 3: Meter Configuration, Global 

Settings to change the operating level back to normal. 

Summary of Contents for 120 DSP

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands