manualshive.com logo in svg

Trilithic 120 DSP, Operation Manuals, Page: 149 / 288

Share
Download
Trilithic 120 DSP Operation Manuals Download Page 149

www.trilithic.com

Page II-93

120 DSP Operation Manual

Basic Signal Level Meter

120

Update Firmware from a USB Flash Drive

Perform the following steps to update the 120 DSP firmware from a USB flash drive:

1. 

Insert the USB flash drive adapter into the USB 

port of the 120 DSP

2. 

Then insert a USB flash drive into the USB 

flash drive adapter.

3.  Select the 

Accept

 softkey.

4.  From the 

Accept

 pop-up menu, select the 

USB 

Firmware

 button as shown in the image to the 

right.

5.  The 

Selected Firmware

 window will be 

displayed as shown to the right. Press the 

Enter

 button to select the firmware file that you 

would like to use.

6. 

Once the file has been transferred from the 

USB flash drive, the new firmware information 

will be displayed as shown in the image to the 

right. Select the 

Install

 softkey to install the 

firmware file.

7. 

Once the installation is finished, the 120 DSP 

will automatically restart with the new firmware.

Summary of Contents for 120 DSP

































































































































































































































































































Reviews:

No comments