TRIGEM 386X, Operation Manual

Page: 27 / 173

Set up the data transmission parameters for the serial port.
Tell the computer to redirect printer data from the parallel
port to the serial port.
5
Connecting the Power Cord
Follow these steps to connect the power cord:
1. Insert the power cord into the AC inlet on the computer’s
back panel, as shown below. To avoid an electric shock, be
sure to plug the cord into the computer before plugging it
into the wall socket.
Figure l-5. AC Power Connections
2. Plug the other end of the power cord into a three-prong,
grounded electrical outlet.
Setting Up Your System
1-9