![TRIGEM 386X Operation Manual Download Page 20](http://html1.mh-extra.com/html/trigem/386x/386x_operation-manual_1162507020.webp)
Besides this manual, you should have the following:
The computer and power cord
2
The Keyboard with attached cable
MS-DOS diskettes
GW-BASIC diskette
MS-DOS User’s Guide
GW-BASIC User’s Guide
In addition to these items, you need a compatible monitor to
use with the computer.
Be sure to keep your packing materials. They provide the best
protection for your computer if you need to transport it later.
Choosing a location
Before you set up your computer, it is important to choose the
right location. Select a spot that provides the following:
A large, sturdy desk or table that can easily support the
weight of your system, including all of its components.
Make sure the surface is hard and flat. Soft surfaces like
beds and carpeted floors can generate static electricity,
which may erase data on your disks and damage the
computer’s circuitry. Soft surfaces also prevent proper
ventilation.
Good air circulation. Air must be able to move freely
under the system as well as behind it. Leave several inches
of space around the computer to allow ventilation.
1-2
Setting Up Your System
Summary of Contents for 386X
