Device description
DALI XC_IB 3.0 | 01.2014 | en
7
3.1
Application area
The DALI XC is a device with four inputs for controlling lighting with single momentary-action switches, double
momentary-action switches and standard switches, which can be combined in some operating modes. The DALI XC
is supplied by the DALI control line. For this reason, a device that provides the voltage supply is required for use in a
lighting system (e.g. DALI PS2).
Figure 2: DALI XC in a lighting system as part of the comfortDIM system
3.2
Operating modes
The
Mode
rotary selector switch is used to set the operating mode. Every letter A–G on the
Mode
rotary selector
switch stands for an operating mode specified on the device. If the rotary selector switch is not turned to a marked
position, the DALI XC will not function.
"MC" operating mode
Rotary selector switch position A
Single momentary-action switches and/or double momentary-action switches and/or standard switches can be used
to recall programmed functions. The
MC
operating mode can only be configured using the masterCONFIGURATOR
software versions 2.10 and higher. The device does not function in
MC
operating mode by default.
i
Note
More information can be found in the masterCONFIGURATOR software user manual installed with the
software. The user manual can also be downloaded from the Tridonic website.
A DALI XC device in
MC
operating mode can replace the DALI MC (art. No 86458507).
"SC-A" operating mode
Rotary selector switch position B
Single momentary-action switches can be used to recall scenes. No scenes can be saved in this operating mode.
A DALI XC device in
SC-A
operating mode can replace the DALI SC-A (art. No 24138906).
Summary of Contents for LuxControl DALI XC
Page 1: ...luxCONTROL DALI XC ...
