Product manual DALI MSensor 5DPI 14 | 06-2017 | 1.1 | en
Scope of documentation
c
5 / 48
1. Validity
These operating instructions are valid for the DALI MSensor 5DPI_14.
TRIDONIC GmbH & Co KG is constantly striving to develop all its products. This means that there may be changes
in form, equipment and technology.
Claims cannot therefore be made on the basis of information, diagrams or descriptions in these instructions.
The latest version of these operating instructions is available on the Tridonic homepage at
http://www.tridonic.com/com/en/operating-instructions.asp
1.1. Copyright
This documentation may not be changed, expanded, copied or passed to third parties without the prior written
agreement of TRIDONIC GmbH & Co KG.
We are always open to comments, corrections and requests. Please send them to
.
1.2. Imprint
Tridonic GmbH & Co KG
Färbergasse 15
6851 Dornbirn
Austria
T +43 5572 395-0
F +43 5572 20176
...
I
NOTICE
The DALI MSensor 5DPI_14 behaves differently to previous versions (V2.0 and earlier). The DALI MSensor is
therefore only backward compatible to a limited extent.
Please pay attention to notes in the individual chapters!
_
The DALI MSensor 5DPI_14 is configured in the masterCONFIGURATOR software (V2.12 or later). Using older
versions of the software to configure the DALI MSensor 5DPI_14 will result in incorrect operation.
Please make sure you are using an up-to-date version of the masterCONFIGURATOR software.
_
Summary of Contents for luxCONTROL DaLI Msensor 5DPI 14
Page 5: ...luxCONTROL DALI MSensor 5DPI 14 Product Manual ...
Page 6: ...c 2 48 ...
