Product manual DALI MSensor 5DPI 14 | 06-2017 | 1.1 | en
Compliance
c
41 / 48
10. Compliance
10.1. CE conformity
Tridonic declares that the DALI MSensor product complies with the relevant EC directives.
10.2. EMC standards
The compliance declaration for the ballast allows the manufacturer to assume that with the exception of radio
interference all the EMC requirements are met also for the luminaire. Radio interference is heavily dependent on the
design of the luminaire and the wiring so it has to be measured in conjunction with the luminaire.
The limit values for EMC are given in the following standards:
...
EN 55015 (Limit values and measuring procedures for radio interference)
_
EN 61547 (EMC requirements)
With the CE symbol on its products and with the compliance declaration, Tridonic confirms that its products
comply with EMC standards.
_
Summary of Contents for luxCONTROL DaLI Msensor 5DPI 14
Page 5: ...luxCONTROL DALI MSensor 5DPI 14 Product Manual ...
Page 6: ...c 2 48 ...
