![TrickleStar TS2301 User Manual Download Page 39](http://html.mh-extra.com/html/tricklestar/ts2301/ts2301_user-manual_1162051039.webp)
39
On the Settings Page
1. Set the safety minimum temperature setpoint. If the cold-water inlet pipe temperature falls
below this setpoint, the water heater will automatically turn on. TrickleStar App will also prompt a
notification to the smartphone.
Note:
• The water heater will remain on until the measured temperature rises above this setpoint.
• All schedule or manual override using the Portal/App/Power button are not allowed.
2. Enable or disable Boost function on the Water Heater Controller and set its duration. If enabled,
Boost can be activated from the Portal or App’s control page.
Note:
• When Boost is activated, no schedule will be executed throughout the boost duration.
• Manual override using the Portal/App/Power button is allowed to deactivate Boost when Boost
is activated.
Fig 39-A
Summary of Contents for TS2301
Page 1: ...User Manual TS2301 Wi Fi Electric Water Heater Controller ...
Page 49: ...49 12 Connect to the Water Heater Controller s Wi Fi broadcast and click Next ...
Page 50: ...50 13 Connect the Water Heater Controller to your Wi Fi network and click Next ...
Page 52: ...52 15 Click Restart to restart the manual identification process ...