Warning Information
Warning English hints
(
)
Left / right / left and right
fiber placement error
(LFPC / RFPC / LRFPC)
Left / right / left and right
fiber disqualification
(LFNQ / RFNQ / LRFNQ)
Optical fiber angle
disqualification
(FANQ)
Large loss
Alignment abnormal
Fiber end face has dust or quality is poor
Splicing loss exceeds the set upper limit or choose
an unmatched optical fiber type fusion program.
The Arc count exceeds the upper limit
The splicing record exceeds the upper limit
Fiber cutting length is too short
Replace electrodes
Record overrun
Reason
Dust on the fiber's surface
Cut the fiber again and ensure the cutting length
Use alcohol to clean fiber again
Left / right / left and right
fiber's end face disqua-
lification
(LFEANQ /
RFEANQ / LRFEANQ)
Optical fiber end angle exceeds preset limit value
Cut the fiber again, if the quality is poor, please
replace the fiber cleaver
The angle error in both horizontal and vertical
direction is greater than the set threshold value
Replace the fiber on both sides
Please clean the V-groove, redo the discharge
correction, and splice again
Replace electrode and detect system parameters
Please use the USB derive the original splicing
record, then delete them
Please cut and clean the fiber again and make the
alignment. If it doesn't work, please detect system
parameters or restart the machine
Treatment method
The fiber placed in the V-groove has been broken
Fiber is not placed in the middle of the V-groove
Propulsion motor connection problem
Replace the fiber
Please detect system parameters
Poor quality of cutting, core defect, cladding damage Remake the fusion fiber
The windshield cover is too tight and the brightness
of LED lights is not suitable
Lack of electricity
Current battery power is less than 2%
Please insert the adapter to charge
19
