Revision: 0
FlexxPump4 B
User Manual
10
EN-
3.
Description of function
3.1
General information
Nr.
Description
0
FlexxPump4 B (FP4 B)
1
LCD
2
Action area (for actions with the activation and programming key)
3
Activation and programming key
4
Lubricant outlet, outlets (different versions possible)
5
Retaining ring
6
Housing
7
Battery compartment
8
Nameplate with designation, CE mark and serial number
9
Through hole for assembly
10
Lubricant inlet with thread for cartridge
10
9
7
Fig. 1: Overview FP4 B
2
1
4
5
3
0
The FP4 B is designed as an extremely compact double piston pump for autonomous
operation with grease as the lubricant. The two pistons run force-controlled and coun-
ter-rotating. The FP4 B is available as a version with one lubricant outlet or as a version
with two lubricant outlets. The outlets are secured by an integrated non-return valve.
Approx. 0.16 cm³ of lubricant is pumped during each dispensing operation; multiple
dispensers can be set one after the other.
The LCD on the front panel displays the various operating states; further information
(empty cartridge, error) can be read.
The present FlexxPump4 as battery version has no electrical interface. The supplied
activation and programming key can be used to adjust the quantity of lubricant pumped
per time to supply the lubrication point with the ideal quantity of lubricant.
8
6
