Revision: 0
FlexxPump1 B
User Manual
32
EN-
6.3.6 SET-Menu
The SET-Menu allows you to change the operating mode of the FP1 B. You can switch
between
Hour-Mode -h-
and
Empty-Time-Mode Et
. The Hour-Mode -h- allows you to
set the number of cycles (c) within a dispensing time (h) in hours. The Empty-Time-Mo-
de Et allows you to set the emptying time (Et) of the cartridge in months. Cycles (c) and
dispensing time (h) or emptying time (Et) can be adjusted after selecting the operating
mode in the PRO menu, see Chapter 6.3.8 or 6.3.9.
-h-
Operating mode Hour-Mode -h-
Et
Operating mode Empty-Time-Mode Et
FP1 B is switched off (OFF).
Remove the activation and programming key from the bottom of FP1 B and place it
on the action area.
Hold the activation and programming key on the action surface. The yellow LED lights
up. Leave the activation and programming key on the action area until SET is displayed
in the LCD.
Remove the activation and programming key from the action area.
Ü
The yellow LED disappears; the LCD flashes together with the green LED twice. The
LCD displays the currently set operating mode. You now have the option of changing
the operating mode.
