9
PHYRO1500UFC
Fig.4
Battery change on the transmitter
If the range of the transmitter decreases, the battery is probably exhausted and must be replaced. For this
purpose, take off the housing cover and remove the used battery. Insert a fresh 12 V battery, as indicated
in the battery compartment and refit the housing cover.
2.5 WIRELESS REMOTE CONTROL
The wireless remote control system consists of a transmitter equipped with two buttons for fog output on
and off, and a receiver pre-attached to the rear panel of each PHYRO-series model.
Connect the receiver to the 5p connector on the rear panel of unit. Now you can control the machine
through the wireless remote control.
WARNING : before removing or replacing the remote control unit disconnect the power cord.
wireless transmitter
wireless receiver
Wireless remote control
2.6 MENU STRUCTURE
MENU
1
Addr
ð
1-512 (highest DMX address recommended: 505) Selects the DMX starting address
2
FLSn
ð
ON/OFF
Selects fluid sensor function
3
nCoL
ð
P0(Blackout)
Selects preset color for<Timer remote>button
P1-P8
4
CH 1
ð
P1-8
Setting wireless transmitter 1° button program
CH 2
ð
P1-8
Setting wireless transmitter 2° button program
CH 3
ð
P1-8
Setting wireless transmitter 3° button program
CH 4
ð
P1-8
Setting wireless transmitter 4° button program
Ht
ð
H_ _ _
Shows current temperature
vEr
ð
V10
Show software version number
