UPM 1400
21
EN
Guard
- Display of transponder guard interval
Signal
- Displays DVB-T/S or C reception type
Function Key Options
:
F1 - deletes the selected channel
F2 - add channels (add transponder submenu)
F3 - starts manual channel search on the selected channel
F4 - starts automatic search in the range 470 MHz - 860 MHz
Terrestrial, packet control
With the
packet monitoring
function, all stored channels are measured in real time. By evaluating over a longer
period of time, for example, errors or phenomena can be highlighted that only occur sporadically.
Only channels / transponders already stored in the UPM 1400 are displayed. Before packet checking can be
performed, the DVB-T/T2 channels must be registered via a search
Function Key Options
:
F1 - restarts the control and the device starts scanning again
F2 - saves the analyzed values over an individual time period to a USB storage medium
F3 - scans transponders for 1 hour and saves results to USB storage
F4 - scans transponders for 24 hours and saves results to USB storage
Terrestrial, spectrum
Signal spectrum mode displays a graphical representation of signal carriers within a certain frequency range
Summary of Contents for UPM 1400
Page 3: ...UPM 1400 3 EN ...
Page 32: ...UPM 1400 EN 32 Notes ...
