- 27 -
CGT 660
n
et work
i
nfor m ation
t
able
(nit)
Bx 1A
/B
off
NIT
=> Make
• To switch the NIT on or off ("
on
"/"
off
") press the
buttons.
• Press the
button to activate the NIT ("
Make
").
—>
All active cassettes which are able to output a NIT ("NIT cassettes")
must be set and ready for reception.
—> The NITs of all "NIT cassettes" are switched on.
—> The cassette fetches all the information (output frequencies, output
data rates, etc.) it needs from all the "NIT cassettes" in order to
generate the NIT. This process may take a few seconds.
Then the NIT is generated, added and sent to all "NIT cassettes".
The other "NIT cassettes" also add this new NIT. The status of all
"NIT cassettes" in the NIT menu changes to "
on
".
The display shows: "
read … / copy …
".
• To switch off the new NIT
("
off
") press the button.
—> The NITs of the other "NIT cassettes" will stay switched on. When
the NIT of the cassette is switched on again ("
on
") by pressing the
button, the previously generated NIT is added again. If you
have changed parameters in the meantime, you must first select
"
Make
" to generate a new, up-to-date NIT.
• Press the
button.
—> The "Network/operator identification" – "
CAT-ID
" menu is activated.
