- 20 -
CGS 470
—> The "Station filter" menu is activated.
s
tation
filter
In this menu, select the channel from the data stream that is to be made avail-
able through this channel strip.
If the error message "
SERVICE
no transponder
" appears, no input signal
is present. In this case, you should check the previous settings as well as the
configuration of the SAT antenna system.
If the "
scanning ...
" message appears on the display, the table of received
channels is being read. Please wait until this process is finished.
As soon as the station filter has found all of the TV or radio channels, the corre-
sponding data appears in the display of the head-end station.
Bx 1A
Das Erste
01/06 + TV
Meaning of the indicators shown in this example:
"
01/06"
The first of a total of six channels has been activated.
"
+
"
The audio stream for the current TV channel is avail-
able in several languages.
"TV"
The data on the display corresponds to a TV channel.
"
Das Erste"
Channel name
Other possible indicators:
"RA"
The data on the display corresponds to a radio chan-
nel.
"
+
"
The audio stream for the current TV channel is avail-
able in several languages.
" *
"
A star indicates that this TV or radio channel is scram-
bled. To enable the channels, a CA module and a
smart card from the respective service provider are
required.
—> For radio channels, the background of the screen of the connected
TV or test receiver is darkened.
—> If a service number (e.g. "
SERVICE 131
") appears instead of "
TV
" or
"
RA
", this indicates that an unnamed station or an undefined data
stream is being received.
