- 26 -
CGS-2 764 C
—> If a service number (e.g. "
131
") appears instead of "
TV
" or "
RA
",
this indicates that an unnamed station or an undefined data stream
is being received.
• Use the
buttons to call up the stations in sequential order, then use
to activate (indicated by "
+
") or to deactivate them (indicated by
"
–
").
—> If a station is scrambled (indication "*"), in this menu you select
whether it should be descrambled using an adequate CA module
(only possible via tuner "A" and "C").
• Press button twice to descramble a station (indication "X").
01/06
Bx 4A TV * X
• Press the button.
—> The "PID monitoring" – "
CA-MENU
" submenu is activated.
pid
monitoring
—> This menu is only displayed if "Tuner A/C" is selected in the "Input
settings" main menu (page 22).
In this menu you can switch off the PID monitoring and call up a menu for the
settings of the CA module (dependent on the CA module).
Bx 4A
PID Check on
CA-MENU
=>
PID monitoring:
—> The factory default of the PID monitoring is switched on.
If particular PIDs are not descrambled the CA module is reset. Ad-
ditionally dropouts may occur if several stations are descrambled.
To prevent this the PID monitoring can be switched off.
• Use the
buttons to switch "
off
" or "
on
" the PID monitoring.
