- 17 -
CCS-2 2001
• Press the
button.
—> The "Ouput signal" – "
OUTPUT
" menu is activated.
o
utPut
signal
In this menu you
– set the output level of the cassette,
– switch the modulator on or off and
– can activate the submenus for the output parameters.
Bx 4
on
-3 dB
OUTPUT
=>
o
utPut
level
Set the output level
This menu item is used to set the output level of the modulator.
• By pressi
ng
adjust the output level ("
0
" … "
–10 dB
").
—> To adjust the output level to the output levels of the other cassettes
please pay attention to chapter 6 "Final procedures"
m
odul ator
Switching the modulator off or on
• To switch off the modulator place the cursor under "
on
" using the button
and switch "
off
" the modulator using the
buttons.
—> The switched off modulator is indicated by "
- - -
" in the display
instead of the channel or frequency display.
• In the case the modulator is switched "
off
" use the
to switch it "
on
".
o
utPut
Par a meter
Set the output parameter
In this submenu you can set the output parameter of the COFDM-Signal.
—> To skip the setting of the output parameters press the
but-
ton. The "Output channel / Output frequency" – "
OUTPUT
" main
