Triax CCS-2 2001, Assembly Instructions Manual

Page: 12 / 45

- 12 - CCS-2 2001
4 t
he Control Panel at a glanCe
4.1 m
enu items
Programme the cassette using the buttons on the control unit of the head-end
station. The two-line display of the control unit then shows the menus.
The parameters and functions to be set are underlined.
Use the key to select the following main menu items:
– Output signal
– COFDM settings
– Output channel / output frequency
– Tuner
– Station selection
– CA module
– Output data rate
– Transport stream and ORGNET-ID
– Network Information Table (NIT)
– Update via satellite
– Factory reset
4.2 C
ontrol Panel
The key pad on the head-end station is used to scroll through the menus step-by-step:
scrolls forward through the menus.
select parameters in the menus.
set values, initiate actions.
selects sub-menus.
scrolls backward through the menus.
saves all entries.
BE-Remote
V44
please wait . . .