![background image](http://html1.mh-extra.com/html/triax/ccs-2-1002/ccs-2-1002_assembly-instructions-manual_1160864013.webp)
- 13 -
CCS-2 1002
4
t
he
Control
Panel
at
a
glanCe
4.1 m
enu
items
Programme the cassette using the buttons on the control unit of the head-end
station. The two-line display of the control unit then shows the menus.
The parameters and functions to be set are underlined.
Use the
key to select the following main menu items:
– Channel strip
– Channel / frequency setting
– Output channel / output frequency
– Output level
– LNB oscillator frequency (LINE A only)
– Input symbol rate (LINE A only)
– Input frequency (LINE A only)
– Station filter
– CA module (if available)
– Output signal
– Transmission parameters
– Station identification
– Stuffing
– Substitute signal
– Transport stream and ORGNET-ID
– Network Information Table (NIT)
– Network/operator identification
– Deleting a PID
– Renaming a PID
– Factory reset
– Reset
4.2 C
ontrol
Panel
The key pad on the head-end station is used to scroll through the menus step-by-step:
scrolls forward through the menus.
select parameters in the menus.
set values, initiate actions.
selects sub-menus.
scrolls backward through the menus.
saves all entries.
BE-Remote
V44
please wait . . .