Triax CCE 210, Assembly Instructions Manual, Page: 16 / 33

- 16 - CCE 210
—> The "Ethernet parameters" – " ETHERNET " main menu is activated.
—> If you do not want to do Ethernet settings, press the but-
ton. The "Output signal path" – " OUTPUT " main menu is activated
(page 18).
Ethernet parameters
In this menu you specify whether the Ethernet parameters for the prospectively
intended control of the cassette are entered …
– automatically by a connected server (" DHCP "),
– manually via the menu (" stat ")
– or whether you will not use the Ethernet output (" off ").
To assign the cassette uniquely, each IPTV cassette must be allocated its own
IP address.
Bx 2
stat ETHERNET
=>
Bx 2
DHCP ETHERNET
=>
Bx 2
off ETHERNET
=>
• Press the buttons to select …
– manual setting (" stat ") of the Ethernet parameter,
– automatic setting (" DHCP ") of the Ethernet parameter or
– to deaktivate Ethernet (" off ").
• Press the button to activate the setting options ("Options").
—> The "IP address of the cassette" – " IP-ADDR " submenu is activated.
IP address of the cassette
If you choose to enter the Ethernet parameters manually, set the IP address of
the cassette in this menu. If " DHCP " is selected, the " IP-ADDR ", " IP-MASK " and
" IP-GATEWAY " sub-menus display the parameters that were assigned automati-
cally by a connected server. If a server is not connected, " 0. 0. 0. 0*"
appears in the corresponding menu. The star " * " in the display means that
the data is provided by a DHCP server.
Bx 2
192.168. IP-ADDR
0.128