![background image](http://html1.mh-extra.com/html/triax/492095/492095_user-manual_1160924013.webp)
IPTV EPG-Server
13
EN
To update the IPTV EPG Server, click select file and in the dialog box, select the image file you received from Triax A/S
-
“xmls_fw_1.1.9.img”. Select Open and return to the Software Upgrade page. Then click the Upgrade button and
wait for the IPTV EPG Server to restart (it can take up to 2 minutes).
5.6.1
How to do an initial install (normal update not working)
If, for some reason, update through the GUI (described in section above) is not working, then it is possible to upgrade
through a USB key. This is the same way if using a recovery image if the device is bricked or not accessible through
the GUI.
Remember to export the config file because this is a clean install, and it is needed to import the saved config file back
after the install.
How to install through USB key:
•
Get the xmls_fw_initial_install_1.1.9.zip file
•
Format the USB key driveasFAT32
•
Unzip and copy everything to the USB key
•
Insert the USB key into the EPGserver and power cycle the server
•
Wait 2 minutes and then remove the USB key drive and power cycle the server again