background image

TRIAD QUICK START GUIDE - 

GARDEN ARRAY GA4 SAT

Mini Flex Sub

Mini Flex Sub

www.triadspeakers.com | 1-800-666-6316 | DOC-00281-B

OVERVIEW

The Triad Garden Array is a family of premium, all-weather landscape 
speakers that are the perfect combination of elegance, sound, and durabil-
ity. This family includes the unique GA4 Satellite and the powerful GA10 
Subwoofer speakers, and are designed to be placed throughout flower-
beds or around the yard blanketing outdoor spaces with rich, beautiful 
audio. The GA4 Satellite speaker is built around a unique, Ultra-Broad 
Dispersion (UBD) driver that provides superior sound coverage using 
fewer speakers. GA4 Sats deliver a 150-degree listening area that is over 
50% wider than traditional landscape speakers, allowing for broader 
speaker placement without compromising sound quality.

GA4 Sats can be driven in stereo pairs by standard amplifiers or receivers.  
To cover large areas, multiple Sats can be tapped at 3.75 to 30 watt for 
70-volt amplifiers or 7.5 to 30 watt for 100-volt amplifiers.

IN THE BOX

  A - Enclosure (x2)
  B - Pipe (x2)
  C - Collet nut (x2)
  D - Stake (x2)
  E - Silicone wire nuts (x4)

A

D

E

C

B

1

Attach pipe to stake. Use a 
rubber mallet if needed. 
Once pipe is attached to 
stake, do not attempt to 
separate.

2

Determine desired 
height of sat and cut 
pipe if necessary.    

Set pipe on solid 
surface and use 
rubber mallet to fully 
attach stake.
Be careful not to 
damage pipe or stake.

Pipe can be cut 
anywhere beyond 
4" (10.2cm) from 
top of stake.

3

Slide collet nut onto pipe 
keeping THREAD SIDE UP.

WARRANTY

NOTE ON PARTS

Pipe is 3/4" nominal size that will mate with standard 3/4" (21mm) 

nominal conduit components.

DIMENSIONS - 

GA4 SAT

SPECIFICATIONS - 

GA4 SAT

7

/

8

"

[19.9 cm]

1

/

16

"

[2.7 cm]

3

/

4

"

7

/

8

"

[19.9 cm]

26 

3

/

4

"

[67.9 cm]

34 

1

/

2

"

[87.8  cm]

21 

1

/

4

"

[53.9 cm]

1

/

4

"

[13.4cm]

18"

[45.7cm]

TOOLS NEEDED

In addition to typical installation tools, Triad recommends the 
following items:  

- Rubber mallet
- Plastic pipe cutting tool

ASSEMBLY

CAUTION

Before proceeding, ensure collet nut is on 

correctly and pipe is cut to correct height. 

Once stake is installed (next step) it 

cannot be removed.

Enclosure size - in. 

(H x W x D)

Enclosure size - cm

(H x W x D)

Product weight (ea.)

Shipping weight (ea.)

Woofer size (in.)

Woofer material

24 

1

/

2

  x  5 

1

/

4

  x  7 

7

/

8

87.8  x 13.4 x 19.9

3.37 lbs    1.53 kg

8.29 lbs    3.76 kg

4.5" nominal

Coated pulp

Recommended

amplifier power (W)

Nominal Impedance 

(ohms)

Minimum Impedance

(ohms)

Sensitivity 

(dB @ 2.83V, 1 m)

Frequency Response 

 4 

π

 +/- 3dB

15-60 direct
3.75 - 35 per Sat
@ 70/100V

8 ohm

5.5 ohm

87

100 Hz - 20 KHz

Triad Speakers warranty information

Limited Hardware Warranty—Triad Speakers warrants its hardware product 
to be free from defects in material and workmanship during the warranty 
period. If the hardware proves to be defective in material or workmanship 
during the warranty period, Triad Speakers will, at its sole option, repair or 
replace the product with a like product. The warranty extends only to 
products purchased directly from Control4 Corporation or an Authorized 
Control4 Dealer. For complete limited warranty information, including 
details on purchaser legal rights as well as limited warranty exclusions, visit 
www.Triad.com/legal/warranty.

Return Merchandise Authorization (RMA) information

For Sales RMAs contact your Inside Sales Associate. Your ISA information 
can be found in the My Account section of the Dealer Portal under 
Control4 Contacts.

Technical Support information

Phone: 503-517-2668 
Hours: 9:00 a.m. – 5:30 p.m. PST (Monday – Friday) 
Email: [email protected]

[4.5 cm]

Copyright ©2017, Control4 Corporation. All rights reserved. Control4 and the Control4 logo are registered trademarks or 

trademarks of Control4 Corporation or its subsidiaries in the United States and/or other countries. All other names and brands may 

be claimed as the property of their respective owners. All specifications subject to change without notice.

min. 4"

(10.2cm)

threaded side

of collet nut

Reviews: