Triad CR LCR2 w/ InRoom Stand & OnWall Bracket - Quick Start Guide
2014.
11.
1
InRoom CR LCR2 Speaker
TriadSpeakers.com • Sales: 1800-666-6316
CR LCR2 Speaker
- Product Info & Warranty -
Page 1
CAUTION!
This speaker
is very heavy, weighing
150 lbs (68kg) plus
stand or bracket. Use
sufficient manpower
and/or equipment to lift
and maneuver it safely
to avoid injury or
damage.
Cinema Reference
Cinema Reference is Triad Speakers’ line of premium loudspeakers designed using the
most advanced technologies to fill large world-class Home Theaters, Screening Rooms,
Listening Rooms and Gaming Rooms to very loud levels with reference quality sound.
LCR 2 is a high sensitivity passive loudspeaker with high power handling & high output,
best served as a high resolution main speaker for both multi-channel rooms and high-
end two-channel rooms
with subwoofer(s)
.
LCR 2 is designed for optimal performance either installed on a wall hidden behind
screens & stretched fabric walls or visible
on its stand out
in the room
.
LCR 2 should be
positioned horizontally with slight toe-in and vertically so that tweeter horn is aimed at
primary listening position.
North American Limited Warranty
Triad speakers are warranted to be free from defects in manufacturing and workmanship
(10) years when operated under normal conditions. Should any such defects occur within the
warranty period call Triad Service at 1-503-256-2600 for an RA (Return Authorization)
number. Return the product in intact factory packaging with RA number clearly visible on
outside of box and proof & date of purchase inside to:
Triad Speakers Inc., 15835 NE Cameron Blvd.,
Portland, Oregon 97230 USA
Triad is not responsible for any shipping damage coming in to Triad. If you do not have intact
factory packaging, contact your dealer or Triad Service for purchase. At our discretion we will
repair or replace the product and return it free of charge. International customers should
contact their dealer for service. This limited warranty is extended only to Triad products and
is expressly in lieu of all other warranties expressed or implied.
OnWall
Bracket
Spine
Top Endcap
Bottom Endcap
A:
(1) Wall Mount
Speaker Parts
OnWall Bracket Parts
D:
4 x #10 X 1.25
oval head screws;
4 X #10 drywall
anchors.
F:
(1) Enclosure
Damper - small
E:
(2) Enclosure
Dampers - large
C:
(10) 1/4 inch X 3 in
Lag Bolts with (10)
1/4inch flat washers.
B:
(1) Template
Socket wrench with
3/8 in (10mm) &
1/2 in (13mm) sockets
OnWall Bracket Tools Needed
3/8” 10mm
1/2” 13mm
Level
Pencil
Grills
A:
(1) 5/16-24 x 4
inch hex bolt
InRoom Stand Parts
InRoom Stand Tools
B:
(1) 5/16” Lock Washer &
(1) 5/16” flat washer.
Cinema Reference LCR InRoom Stand is designed
to position the speaker’s acoustic center (middle
of tweeter) at 44 inches (1118mm) above the floor
with its adjustable feet at minimum height.
You will find it easier to install the InRoom Stand with the speaker laying
face down with
its
bottom end raised & supported approximately 6 inches
(15 cm) above the floor. Protect the drivers, speaker face, and speaker
back with packing foam from the crate. When the stand post is seated,
tighten the hex bolt, flat washer & lock washer with a ½ inch (13mm)
socket. Raise the stand, move into position, and level the adjustable feet.
InRoom Stand Installation
9/16
” 1
4
mm
Socket wrench
with 3/8 in (10mm) &
9/16
in (1
4
mm) sockets
Specifications
98dB @ 2.83v, 1m; 500 watts power handling; 4 ohms nom
inal
impedance;
f3 = 80Hz;
recommended crossover: 80-100Hz depending on speaker location & room;
120db+
max output; 150 lbs (68 kg); 31”W x 47”H x 9.75”D (787mm x 1194mm x 248mm)
