8
No part of this document may be reproduced, stored in retrieval system or transmitted by
any means, electronic, mechanical, photocopying, recording or otherwise, without written
permission from Tri-Star Technologies.
2.2 Hazards associated with wire cutting equipment
There are several potentially hazardous areas associated with cutting and stripping
equipment. These include exposed electrical current parts, the cutting and stripping blades area,
any moving parts of the machine such as wire feeding mechanisms, pulling rollers, swivel guide
and cutting head, and compressed air connections and nozzles.
It is dangerous to touch current-carrying parts. For service and maintenance purposes,
housings and covers may be removed only when the machine is stopped and main power is
switched off.
There is potential danger of being cut in the area around the blades. Always turn off the
machine before working on the cutting head or blades.
There is potential danger of being pinched in the area around the moving parts of the
machine. Always turn off the machine before working on the moving parts.
Only properly trained personnel familiar with all safety procedures are permitted to
operate the M100LFG-TT-A. Maintain and service the system.
Prevent unauthorized use of the system. It could be dangerous if improperly operated by
untrained personnel.
