Step 1.
Please make sure
your Terminal
Emulator
Software is
running
Step 4.
Configure your software to allow
input control. Click setup and select
Terminal from the drop down menu
Step 5.
Select LF on Receive in
New-Line; Set local echo:
You can enter the
command and click OK.
Step 2.
Setup your serial
COM port. Open
your software
and click setup
and select Serial
port from the
drop down menu
Step 3.
Select the COM port the DB9 is
plugged into. If you use
keyspan, it will automatically
assigned the COM port for you.
Please make sure to select
Baud rate: 57600, Data:8bit,
Parity:None, Stop:1bit, Flow
control: None and Click OK
2x2 HDMI Matrix Switcher / Splitter is designed to work as a switcher for multiple Audio/Video sources and displays. The unit is capable of
switching HDMI signals up to 60ft @ 1080p/60Hz over 24 AWG HDMI cables among two sources (such as: BluRay player, HD set top boxes,
game systems, etc.) and two HDMI displays.
- Allows up to 2 HDMI sources to be independently switched to 2 outputs
- Transmission Distance 60ft @ 1920x1080 over 24 AWG HDMI cable
- HDMI Compliant (Bandwidth = 225MHz)
- HDCP & EDID compliant
- Supports port selection by IR control and push button
HDMI 2x2 MATRIX SWITCHER/SPLITTER WITH RS-232 FUNCTION
• Matrix Switch
• (2) Surface mountable bracket
• (1) Power Adapter
• (4) Screw
• (1) Remote controller
• (1) User manual
®
• (1) DB9 Male to 3.5mm male cable
Step 1.
Connects the
HDMI matrix
switch to the
source (up to 2)
using HDMI
cable
Step 3.
Connects the
HDMI matrix
switch to the
power
Step 2.
Connects the HDMI
matrix to super
terminal PC using
RS232 cable
DVD/BD Player
(Source 1)
Source
HD Satellite
(Source 2)
Step 5a.
How to switch manually:
1. Push switch 1 button for input A to output 1.
Push switch 1 again for input B to output 1, etc.
2. Push reset button to reset.
Step 5b.
How to switch from remote:
Button 1 cycles input for output 1,
Button 2 cycles input for output 2,
etc.
Step 4.
Connects the
HDMI matrix
switch to the
HDTV using
24AWG HDMI
cable
HDTV 2
HDTV 1
POWER
OUTPUT 1
INPUT
SWITCH 2
SWITCH 1
1
A
B
RESET
IR
RS232
OUTPUT 2
INPUT
2
A
B
POWER
OUTPUT 1
INPUT
SWITCH 2
SWITCH 1
1
A
B
RESET
IR
RS232
OUTPUT 2
INPUT
2
A
B
For RS-232 Serial Control Installation
