21
HCV 10D35 DAB
BLUETOOTH OPERATION
PAIRING BLUETOOTH DEVICES:
1. Switch on the appliance and press the BLUETOOTH button (51) on the remote control;
2. In Bluetooth mode, the "BT LINK" indicator flashes, the system automatically enters the search. Otherwise hold for 3sec. the
UNPAIR button (38) on the remote control;
3. Activate the Bluetooth functionality on the external device and start searching for devices;
4. At the end select the "HCV 10D35 BT" device;
5. Enter the password "0000" if required;
6. Press
/
button (46) on the remote control to start playback and
9
button (27) and
:
button (28) keys on the remote
control for selecting the tracks;
CONNECTING YOUR BLUETOOTH DEVICE USING NFC:
NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as
mobile phones and IC tags Thanks to the NFC function, data communication can be achieved easily just by touching the relevant
symbol or designated location on NFC compatible devices.
1.
Make sure your Smartphone or Bluetooth device has the NFC feature
, and it is turned ON (enabled);
2. Press the SOURCE Button(1) on main unit or BLUETOOTH Button(51) remote control to enter Bluetooth mode, the Bluetooth “BT
LINK” message will be shown in display and flashing;
Note:
If the HCV 10D35 DAB is connected to other smartphone, press and hold the UNPAIR Button on remote control or main unit
for 3 seconds to enter Bluetooth paring mode, display will show “BT LINK” message and flashing.
3. Touch the back of your smartphone to the NFC linking point icon located on the front panel of the unit (16).
Check the owner's manual of your Bluetooth device to locate the NFC touch point if you are not sure where it is;
4. If the HCV 10D35 DAB is in pairing mode, it will turn on and enter Bluetooth mode automatically and pair with your smartphone.
Display “BT LINK” Bluetooth icon Stop flashing;
5. Some smartphones may ask you to confirm the pairing if they are not paired before.
AUX IN OPERATION
You can connect an audio devices to the unit using a 3.5mm audio cable (not supplied).
1. Connect the 3.5mm plug (not supplied) into the AUX-IN socket on the rear of the unit (13);
2. Connect the other end to your audio device;
3. Press the AUDIO IN button (50) on the remote control, Power on the external audio device and begin playback.
ENGLISH
