www.trendstyle.com.au
Step 1
Follow these instructions to
build and attach your cabinet.
Hardware included
Tools you will need
To put your trendstyle cabinets together you will need the following tools.
Cordless drill with:
•
Number 2 screw tip
•
4mm drill bit
•
Number 12
countersinking drill bit
Before you get started
All cabinets will need to be attached to the wall using a minimum of
8 gauge 65mm screws if you have a stud wall. If your wall is
concrete, brick or another surface ask your hardware specialist for
advice on the right fixing method.
To help identify panels, counter sunk holes always face
outwards.
All holes that aren’t already pre-drilled should be drilled prior to
screwing using a No 12 countersinking drill bit.
Make sure you always use safety gear like a mask, ear muffs and
glasses when using tools.
Make sure you leave plumbing and electrical work to qualified trades
people. Never try this yourself.
For extra strength use exterior woodworking glue when
assembling cabinets.
Tape
measure
D
adjustable
legs
x 4
E
stick on end
caps
x 12
Pencil
Clamps
(quick release)
Safety
gear
Adjustable
square
65mm
wood screw
Spirit level
(900mm recommended)
Wall fixing
(If necessary)
page 1
B
28mm
wood screws
x 26
A
50mm
wood screws
x 46
F
door
buffer
x 4
450mm
pantry
C
plastic shelf
support
x 4
