The IDE to SATA Converter (TU-IDES) allows you to connect IDE
devices such as CD, DVD and hard disk drives to a Serial ATA
port on your computer's motherboard.
Without software installation required, simply connect power and
data cables to IDE devices to SATA connector on your computer.
TU-IDES(V1.0R)
IDE Device to Serial ATA Converter
TU-IDES
rev:05.15.2008
• Connect any IDE CD, DVD or hard drive device to an available Serial ATA port
• Use your current IDE device on new SATA motherboards
• Utilizes Serial ATA 1.0 and hot-pluggable technology
• Master/slave hard drive emulation supported
• Supports PIO mode 0~4 and Ultra DMA mode 0~7
• Supports ATAPI Packet command set, and 48-bit LBA addressing
• Supports additional ATA commands for serial ATA SCR access
• Power save mode built-in
• Serial ATA Built In Self Test (BIST) ready
• 2-Year Warranty
FEATURES
medianet
