TRENDnet TPE-3012LS, User Manual, Page: 7 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPE-3012LS / TPE-3018LS
3
Product Hardware Features
TPE-3012LS
Rear View
•
AC Power Connector – Connect the AC power cord to the connector and the
other side into a power outlet. (Input: 100~240VAC, 50/60Hz)
Front View
•
•
4-Digit 7-Segment Display - Displays total power, available power, and
power consumption per port using the toggle button.
•
Reset Button – Press and hold this button for 10 seconds and release to
reset the switch to factory defaults.
•
PoE+ Gigabit Ports (1-8) – Connect PoE and non-PoE network devices.
•
Gigabit Ports (9-10) – Connect non-PoE devices or uplinks.
•
SFP Slots (11-12) – Supports optional 1000BASE-SX/LX mini-GBIC
modules.
•
Diagnostic LED Indicators
SYS LED
On : The device is receiving power.
Blinking : The device is booting up.
Off
: The device powered off or not receiving power.
PoE Alert
On : When reaching near the max PoE power budget provided
100W or above, the LED will turn on to indicate that PoE
power consumption is near max. budget available.
Off : When the PoE power provided is below the 100W PoE
power budget.
PoE+ Gigabit Ports (1-8)
On : When the Link/ACT LED lights on, the respective
port is successfully connected to an Ethernet
network.
Green/Amber Green indicates the link is connected at 1000Mbps.
Amber indicates the link is connected at
10/100Mbps.
Blinking : When the Link/ACT LED is blinking, the port is
transmitting or receiving data on the Ethernet
network.
Off : No link.
PoE (Power over Ethernet)
Green : When the PoE powered device (PD) is connected and the
port supplies power normally.
Off No PoE powered device (PD) connected or unplugged the
PoE output port.
Gigabit Ports (9-10)
On : When the Link/ACT LED lights on, the respective
port is successfully connected to an Ethernet
network.
Green/Amber Green indicates the link is connected at 1000Mbps.
Amber indicates the link is connected at
AC Power Connector
Gigabit
Ports
PoE+ Gigabit
Ports
Reset
Button
Diagnostic
LEDs
SFP
Slots
4-Digit
Display