TRENDnet TL2-FG142, User Manual

Page: 25 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
20
Items Description
Mode Indicates the SSH mode operation. Possible modes are:
Enabled: Enable SSH mode operation.
Disabled: Disable SSH mode operation.
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.5.5HTTPS Configuration
Configure HTTPS on this page.
Items Description
Mode Indicates the HTTPS mode operation. When the current connection is
HTTPS, to apply HTTPS disabled mode operation will automatically
redirect web browser to an HTTP connection. Possible modes are:
Enabled: Enable HTTPS mode operation.
Disabled: Disable HTTPS mode operation.
Automatic
Redirect Indicates the HTTPS redirect mode operation. It only significant if HTTPS
mode "Enabled" is selected. Automatically redirects web browser to an
HTTPS connection when both HTTPS mode and Automatic Redirect are
enabled. Possible modes are:
Enabled: Enable HTTPS redirect mode operation.
Disabled: Disable HTTPS redirect mode operation.
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.5.6Access Management Configuration
Configure access management table on this page. The maximum number of entries is
16. If the application's type match any one of the access management entries, it will
allow access to the switch.
Items Description
Mode Indicates the access management mode operation. Possible modes are:
Enabled: Enable access management mode operation.
Disabled: Disable access management mode operation.
Delete Check to delete the entry. It will be deleted during the next save.
VLAN ID Indicates the VLAN ID for the access management entry.
Start IP
address Indicates the start IP address for the access management entry.