THA-101
WiFi Smart Plug
Q u i c k I n s t a l l G u i d e
Setup for Repeater Mode
1
Power on the Extender
Step1. Plug your Wireless Extender into an
electrical socket.
Step2. Check the LEDs:
the power LED
should be always on when system is
ready.
Connect to the Wireless
Extender
2
Step1.
Default SSID is “THA-101” and
security key is “12345678”.
Step2.
Set your wireless adapter in DHCP
client and waiting for getting IP
Address from the Wireless Extender.
Step3.
Open a web browser and enter
“192.168.1.254” in URL field to open
the configuration page.
Step4.
Default user name is “admin” and
password is “password” to access
WEB GUI.
3
Manually Configuration:
Step1. Open Wireless Settings / AP Client
page.
Step2. Setup the SSID and Security of AP
that you want to connect to:
Click
APPLY to finish.
Notes:
The Wireless Extender is designed as a pure wireless
device, so there are no any RJ-45 ports for Ethernet
cable to connect to. Please prepare any IEEE802.11
ac/b/g/n compliant wireless adapter for next setup
step.
OR
you can use “SCAN” to refresh the
wireless network and select an AP to
connect to.
“The
product
shall
be
used
in
the
residential
environment
notwithstanding
use
in
commercial,
business
environments.
If
you
want
to
use
other
than
the
above
environments,
please
contact
AboCom
first.”
WPS Configuration:
Step1.
Press the WPS button of the Wireless
Extender over 3 seconds.
Step2.
Then press the WPS button of the
wireless router/AP over 3 seconds
too. Step 1 and Step 2 need to be
done in 200 seconds.
