TRENDnet TEW-826DAP, User Manual, Page: 6 / 72

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-826DAP
3
2.
4GHz
5GHz 2
5GHz 1
Product Hardware Features

PWR: This indicator turns green when the device is powered.

LAN1: This LED indicator turns green when the access point’s LAN1 port is
connected. The LED indicator blinks during data transmission.

LAN2: This LED indicator turns green when the access point’s LAN2 port is
connected. The LED indicator blinks during data transmission.

5GHz2: This LED indicator turns green when the wireless is enabled. The LED
indicator blinks during data transmission.

5GHz1: This LED indicator turns green when the wireless is enabled. The LED
indicator blinks during data transmission.

2.4GHz: This LED indicator turns green when the wireless is enabled. The LED
indicator blinks during data transmission.

Reset button: Use a sharp tool to press and hold this button for 15 seconds to
reset the access point.

Power button: If your access point is to be powered using the power adapter, this
toggle button can be used to turn on or off the access point. Note: this only affects
the Power port connection; this button has no function if your access point is
powered by a PoE+ connection.

Power port (optional): If you are not using PoE+ to power the AP, you can connect
the power adapter from your access point power port to an available power outlet.

Gigabit LAN2 port: Plug an Ethernet cable (also called network cables) from
your access point to your router and/or wired network devices.

Gigabit LAN1 PoE+ port: Plug an Ethernet cable (also called network cables) from
your access point to your router and/or wired network devices. The Gigabit port
complies with standard 802.3af/at PoE/PoE+ so you can power this AP with a PoE+
switch or injector that complies with 802.3af/at.

Security Lock: You may choose to secure this AP using compatible security locks
including Kensington Locks.
Low-profile housing
PWR
LAN2
Reset
button
Power port
Power
button
LAN1
LAN2
LAN1
(PoE)
Security Lock