TRENDnet TEW-826DAP, User Manual, Page: 28 / 72

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-826DAP
25
General Configuration
The following section details general configurations of the device’s wireless radios. The
availability of the configurations will depends on the radio’s Operation Mode. For
detailed information regarding functionalities within specific Operation Modes, please
see their respective dedicated sections.
Secure your wireless network
Wireless (2.4GHz, 5GHz1, or 5GHz2) > Wireless Network > Edit
After you have determined which security type to use for your wireless network (see
“
How to choose the security type for your wireless network ” on page 23), you can set up
wireless security.
1. Log into your management page (see “ Access the management page ” on page
8).
2. Click on the Wireless 2.4GHz, 5GHz1, or 5GHz2.
3. Underneath the basic wireless band section, you will see Wireless Network and
all your wireless network profiles will be listed.
4. Click on the Edit button next to the wireless profile you want to configure.
5. Select from the drop-down list to the wireless security to configure.
Selecting WEP-OPEN, WEP-SHARED: If selecting WEP (Wired Equivalent Privacy), please
review the WEP settings to configure and click Save to save the changes.
Note: WPS functionality is not available when using WEP.
In the Security Mode drop-down list, select WEP-OPEN or WEP-SHARED.
Note: It is recommended to use WEP-OPEN because it is known to be more secure than
Shared Key.

Default Key: Select the WEP Key from the drop-down list to use
WEP Key Format HEX ASCII
Character set 0-9 & A-F, a-f only Alphanumeric (a,b,C,?,*, /,1,2, etc.)
64-bit key length 10 characters 5 characters
128-bit key length 26 characters 13 characters