TRENDnet TEW-826DAP, User Manual, Page: 15 / 72

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-826DAP
12
Wireless Client List
Note: this status page will change depending on the selected Operation Mode of the
wireless radios.
Status > 2.4G/5G1/5G2 Wireless Client List
This section displays the wireless clients connected to the specified wireless radio.
1. Log into your management page (see “ Access the management page ” on page
8).
2. Click on Status, and click on 2.4G Wireless Client List, 5G1 Wireless Client List,
and 5G2 Wireless Client List.
3. Review the settings:

SSID:#–Displays the SSID that this client is connected to.

MAC Address–Displays the MAC Address of the connected client.

Mode–Displays the wireless mode of the connected client.

Rate–Displays the wireless link rate of the connected client in Megabits per
second.

Signal–Displays the signal strength as a percentage (%) out of 100 (max).

TX(Bytes)//RX(Bytes)–Displays the amount of data sent (on top) and
received (on bottom).

Kick and Ban–Click this button to kick and ban the MAC Address from
being able to connect on this radio.