
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-731BR
30
•
Tunnel Link-Local Address
– Displays the IPv6 local link WAN (Internet)
interface address.
•
6rd Border Relay IPv4 Address
– Enter the IPv4 relay address used for the
tunnel provided by your ISP.
•
Primary IPv6 DNS Server
– Enter the primary IPv6 DNS server address provided
by your ISP.
•
Secondary IPv6 DNS Server –
Enter the secondary IPv6 DNS server address
provided by your ISP.
2. To save changes, click
Apply
.
Clone a MAC address
Main > WAN
On any home network, each network device has a unique MAC (Media Access Control)
address. Some ISPs register the MAC address of the device (usually a router or a
computer) connected directly to the modem. If your computer MAC address is already
registered with your ISP and to prevent the re-provisioning and registration process of a
new MAC address with your ISP, then you can clone the address (assign the registered
MAC address of your previous device to your new router). If you want to use the MAC
address from the previous device (computer or old router that directly connected to the
modem, you should first determine the MAC address of the device or computer and
manually enter it into your router using the clone MAC address feature.
Note:
For many ISPs that provide dynamic IP addresses automatically, typically, the
stored MAC address in the modem is reset each time you restart the modem. If you are
installing this router for the first time, turn your modem before connecting the router to
your modem. To clear your modem stored MAC address, typically the procedure is to
disconnect power from the modem for approximately one minute, then reconnect the
power. For more details on this procedure, refer to your modem’s User Guide/Manual or
contact your ISP.
1. Log into your router management page (see “Access your router management page”
2. Click on
Main
, and click on
WAN
.
3. Under your Internet connection settings, find the
MAC Address
section shown below.
4. Click either
Clone MAC Address
to clone the MAC address of the computer you are
currently using or manually enter the 12-digit MAC address of your old router.
5. To save changes, click
Apply
.
Summary of Contents for TEW-731BR
Page 1: ...TRENDnet User s Guide Cover Page...
Page 62: ......