© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEG-S50ES
2
Ports
Five gigabit ports provide a 10Gbps switching capacity
Compact Design
With a compact and lightweight metal housing design, this switch is well-suited for
desktop or wall mount installations
Network Management
The web-based management interface offers features for loopback detection, RSTP,
static link aggregation, VLAN, IGMP Snooping, and QoS
Monitoring
SNMP, SNMP Trap, and Port Mirroring support administrator monitoring solutions
Troubleshooting
Traffic statistics and a convenient cable diagnostic test
Fanless
Its fanless design is ideal for quiet environments that require silent operation
LED Indicators
The desktop managed switch includes LED indicators that convey port status
Product Hardware Features
Front View
Rear View
Reset Button – Press and hold the button 1~5 seconds and release to
reboot the device. Pressing the button more than 6 seconds will reset
the switch to factory defaults. The ports LEDs will display Amber and
then turn off to indicate that the reset was initiated.
Gigabit Ethernet Ports (1-5) – Connect network devices.
LED
State
Status
PWR
(Green)
ON
When the PWR LED is on, the device is powered on.
OFF
When the device is not receiving power, the PWR LED is OFF.
Ports 1-5
Left LED
(Green)
ON
Network speed at 1000 Mbps
BLINKING Data is transmitting/receiving.
OFF
Ethernet port is not connected.
Ports 1-5
Right LED
(Amber)
ON
Network speed at 10/100 Mbps
BLINKING Data is transmitting/receiving.
OFF
Ethernet port is not connected.
Reset Button
Gigabit Ports
AC Power Port
Summary of Contents for TEG-S50ES
Page 1: ...TRENDnet User s Guide Cover Page...
Page 65: ......