© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEG-S50ES
30
1.
From the menu on the left: click on Save, then click the blue button Save
Settings to Flash.
2.
Click Continue to return to the Web Configuration of your switch.
Set Ingress Rate Limiting
Network > Bandwidth Control > Ingress Rate Limiting
This section allows you to set the ingress (receive) rate for each switch port.
1. Log into your switch management page (see “
Access your switch management page
on page 7).
2. Click on Network, click on Bandwidth Control, and click on Ingress Rate Limiting.
3. Review the settings for each port. Click Apply to save the settings.
Bandwidth – Select the bandwidth limit in bits per second from the dropdown
menu.
NOTE: The configured settings are only applied to the switch’s temporary memory and
will be lost upon the next power-cycle. Please follow these next steps to save the
configurations to the switch’s NV-RAM to ensure the settings will remain throughout
power-cycles and reboots:
1.
From the menu on the left: click on Save, then click the blue button Save
Settings to Flash.
2.
Click Continue to return to the Web Configuration of your switch.
Summary of Contents for TEG-S50ES
Page 1: ...TRENDnet User s Guide Cover Page...
Page 65: ......